If you’re looking for the most compact li’ldisplay for aRaspberry Pi(mostlikely aPi Zero) project, this might be just the thing you need!

TheAdafruit 128×32 PiOLEDis your little OLED pal, ready to snap onto any and all Raspberry Pi computers, to give you a little display. The PiOLED comes with a monochrome 128×32 OLED, with sharp white pixels. The OLED uses only the I2C pins so you have plenty of GPIO connections available for buttons, LEDs, sensors, etc. It’s also nice and compact so it will fit into any case.

These displays are small, only about 1″ diagonal, but very readable due to the high contrast of an OLEDdisplay. This screen is made of 128×32 individual white OLED pixels and because the display makes its own light, no backlight is required. This reduces the power required to run the OLED and is why the display has such high contrast; we really like this miniature display for its crispness!

Using the display is very easy, we have a Python library for the SSD1306 chipset. Our example code allows you to draw images, text, whatever you like, using the Python imaging library. Our tests showed 30 FPS update rates so you can do animations or simple video.

Comes completely pre-assembled and testedso you don’t need to do anything but plug it in and install our Python code! Works with any Raspberry Pi computer, including the original Pi 1, B+, Pi 2, Pi 3, Pi 4, and Pi Zero.

Please note that OLED displays are made of hundreds of…OLEDs! That means each pixel is a little organic LED, and if its kept on for over 1000 hours it’ll start to dim. If you want to keep the display uniformly bright, please turn off the display (set the pixels off) when it isn’t needed to keep them from dimming.

Instructions, software, downloads and more in the Learning Guide!

Technical Details

Revision History:

• As of May 9, 2025-We updated this PCB withAdafruit Pinguinto make a lovely and legible silkscreen.

Product Dimensions: 35.0mm x 20.0mm x 10.5mm / 1.4″ x 0.8″ x 0.4″

Product Weight: 3.5g / 0.1oz