• Track Resistance: 200ohm
• No. of Turns: 1
• Resistance Tolerance: 10%
• Temperature Coefficient: 100ppm/C
• Potentiometer Mounting: Through Hole
• Adjustment Type: Top
• Contact Resistance Variation +: 1%
• Full Power Rating Temperature: 85C
• Lead Diameter: 0.5mm
• Operating Temperature Range: -55C to +125C
• Resistance: 200ohm
• Resistor Element Material: Variable Rotary Cermet

A trimpot or trimmer potentiometer is a small potentiometer which is used for adjustment, tuning and calibration in circuits.

pcb mountable with 3 terminal pins. The voltage between the terminal varies as the preset is rotated.

The Variable resistors are used for variating voltage as per the need in a circuit. The outer two pins are connected to Vcc and 0V, and cetner pin outputs a variable volatge between 0v and Vcc as the rotary cermet is rotated.

A trimpot or trimmer potentiometer is a small potentiometer which is used for adjustment, tuning, and calibration in circuits. When they are used as a variable resistance (wired as a rheostat) they are called preset resistors. Trimpots or presets are normally mounted on printed circuit boards and adjusted by using a screwdriver.

• Track Resistance: 200ohm
• No. of Turns: 1
• Resistance Tolerance: 10%
• Temperature Coefficient: 100ppm/C
• Potentiometer Mounting: Through Hole
• Adjustment Type: Top
• Contact Resistance Variation +: 1%
• Full Power Rating Temperature: 85C
• Lead Diameter: 0.5mm
• Operating Temperature Range: -55C to +125C
• Resistance: 200ohm
• Resistor Element Material: Variable Rotary Cermet