The FSE-TCVR-50-IP is an active IP transceiver antenna for the FreeSpeak Edge wireless system. The transceiver delivers duplex communications from the Eclipse HX matrix system via the E -IPA-HX interface card to the FreeSpeak Edge beltpacks. Each transceiver can support up to ten FSE-BP50 beltpacks. When supported with an E-IPA-HX card with 64 licensed ports, up to 64 FreeSpeak Edge beltpacks and 64 transceivers can be deployed with one Eclipse HX matrix system. The FreeSpeak Edge Digital Wireless RF Configuration Guide provides specifications, best practices and guidance for using the 5 GHz band and RF channels.Main Features:LED status indicators on top and bottom of transceiverExternal omnidirectional antennas for the transceiverDual redundant radios per beltpack and transceiverSeparate radios for RF and radar scanningWall-mount plateMicrophone stand mounts (metric and imperial threads)Tripod spigot mountFunctions with FreeSpeak Edge base, Arcadia Central Station, and E-IPA-HX cardsSupports 10 FreeSpeak Edge beltpacks per transceiverSupports up to 64 transceivers and beltpacks per 64 port E-IPA-HX card and 200 beltpacks per Eclipse HX systemRobust radio link works in high multipath or reflective environmentsWi-Fi coexistenceStandalone mode for site survey and demoAES256 shared key encryptionDual network connectionsetherCON RJ45 network connectionHigh speed SFP fiber cagePower-over-Ethernet (PoE) up to 330ft (100m)Daisy-chaining up to three locally powered transceiversIP53 rating for wet and dusty conditionsSpecifications:Frequency Spectrum: 5170 -5875MHz (20MHz channels set by country)Output Power: Adjustable from 1 24dBm (Maximum output power is determined by selected channel and country)Modulation: OFDMAntennas: 3dB OmniAntenna Connector: RP-TNCInput Voltage: 100 to 240V AC (50 – 60Hz)Output Voltage: 12V @ 5A (60W)MTBF (min.): 300,000 Hours (Calculated Hours at 25C by Telcordia SR-332)IP53 water and dust resistanceOperating: 32 to 113F (0 to 45C)Storage: 86 to 158F (30 to 70C)Humidity: 20-90% Non-CondensingDimensions With Transceiver Mount Bracket: 7.60 x 8.25 x 4.12in (WxHxD) (193.04 x 209.6 x 104.65mm)Dimensions Without Transceiver Mount Bracket: 7.60 x 8.25 x 3.37in (WxHxD) (193.04 x 209.6 x 85.6mm)Transceiver Mount Bracket Dimensions:-4.26 x 4.51 x 0.75in (WxHxD) (108.27 x 114.62 x 19.05mm)-Distance Between Vertical Screw Holes: 3.5in (88.9mm)-Distance Between Horizontal Screw Holes: 3in (76.2mm)Weight With Transceiver Mount Bracket: 2.527lbs (1.15kg)Weight Without Transceiver Mount Bracket: 2.252lbs (1.02kg)