SLX-D Digital Wireless delivers transparent, 24-bit digital audio and rock solid RF performance with streamlined network-ready setup and rechargeability options in a suite of versatile wireless system configurations. Featuring industry-leading digital wireless technology and design in a convenient full-rack quad configuration, the SLXD4QDAN+ efficiently saves space and accessories, and easily scales to match channel requirements with Dante Audio connectivity.Main Features:Four channels in one rack spaceDante Audio Networking, carried on single Ethernet cableWide 138 MHz tuning range32 available channels per frequency band (region dependent)Transparent 24-bit digital audioExtended 20 Hz to 20 kHz frequency range (microphone dependent)118 dB dynamic rangeAudio Summing matches receiver output to available mixer channels (4,3,2 or 1)RF Cascade creates an 8-channel system by linking two SLXD4Q+, no other accessories requiredBias Voltage power supply managementDigital predictive switching diversityEasy pairing of transmitters and receivers over IR scan and sync4 XLR and 4 1/4″ outputs and 2 local ethernet connectionsCompatible with Shure Wireless Workbench control softwareRugged metal constructionSpecifications:Dimensions (H * W * D): 1.65 x 15.47 x 5.98 in. (42 x 393 x 152 mm)Weight: 1750 g (without antennas)Housing: Galvanized SteelPower Requirements: 15V@ 0.9RF INPUTSpurious Rejection: >75 dB (Typical)Connector Type: BNCImpedance: 50 OhmsBias Voltage: 15 V DC, 150 mA maximum, per antenna (switchable on-off)AUDIO OUTPUTAudio Frequency Response: 20 Hz- 20 kHz (+1, -2 dB)Gain Adjustment Range: -18 to +42 dB in 1 dB stepsConfiguration:-1/4″ (6.35 mm): Balanced (Tip=audio +, Ring=audio -, Sleeve=ground)-XLR: Balanced (1=ground, 2=audio +, 3=audio -)Impedance:-1/4″ (6.35 mm): 1.1 kD (550 Ohm Unbalanced)-XLR (line): 500 Ohm (250 Ohm Unbalanced)-XLR (mic): 150 OhmFull Scale Output:-1/4″ (6.35 mm): +12 dBV Unbalanced (+18 dBV Balanced)-XLR (LINE setting): +18 dBV-XLR (MIC setting): -12 dBVMic/Line Switch: 30 dB padPhantom Power Protection:-1/4″ (6.35 mm): Yes-XLR: YesCASCADE OUTPUTConnector Type: BNCNote: For connection of one additional receiver in the same bandConfiguration: UnbalancedImpedance: 50 OhmInsertion Gain: 0-2 dB, typicalNETWORKINGNetwork Interface: 20 Hz- 20 kHz (+1, -2 dB)Network Addressing Capability: DHCP or Manual IP addressMaximum Cable Length: 100 m (328 ft)